You are here: Home » Products » Screen printing machine » Glass screen printing machine » Taoxing Automatic Positioning High Precision Screen Printing Machine for Gas Stove Glass
This product has been off the shelf!
Share to:

Taoxing Automatic Positioning High Precision Screen Printing Machine for Gas Stove Glass

TX-80120ST Semi auto Screen Printing machine is suitable for flat surface printing on glass, especial for mid glass, like access control glass,door line glass,kitchen appliance glass amd table glass.

  • TX-80120ST
Machine Description



Be applied to architectural glass, decorative glass, kitchen appliance glass and other other glass printing.


1.vertical structure with the motor driven printing plate goes up and down vertically, and the motor driven print head moves left/right.    

2. Single chip controlled circuit, printing and plate goes up and down using independent driving source.

3. Pneumatic controller controls the printing knife moves up and down, photocell eye controls the stroke, which is independent to tune.

4. Set manual/semi-automatic /automatic three modes , the break time of printing is digital controlled.

5. Independent designed head rising and down setting, makes it convenient to clean the scraping blade/reclaiming blade,screen plate during loading and unloading.    

6. Double guide column master the clamps arm, and install the adjusting device to adjust the distance between plates at the same time, which is convenient to tune.


Model TX-80120ST
Table Size (mm) 900*1300MM
Max printing Size (mm) 800*1200MM
Max Frame size (mm) 1000*1400MM
Screen frame height  25-40 (mm)
Printing thickness  30 (mm)
Max Printing Speed 600-800
Power 3p,220V/380V,50Hz
Air Pressure(Mpa) 0.5-0.6kfg/cm²

1. The machine controlled by MIC.

2. Adopt "Omron" relay, "chint"AC contactor , RIKO Photoelectric eye switch produced in Taiwan.

3. Adopt "Cheng BangGear Motor from Taiwan, driven by Variable printing.

4. Printing scraper and reclaiming blade controlled by Japanese SMC brand pneumatic component.

5. Moves up and down/left and right during printing, controlled by Taiwan ABBA Precision guide rod.

6.Left/right scratchers adopt HIWIN precision liner guide from Taiwan.

7.Printing plate adopts pneumatic stainless steel and suction system which is produced by Shanghai State-owned factory.

Machine Details
Precision Guide Rail 
Squeegee / flood barclamping
High Quality AC Geared Motor
High Quality Electrical Components

Imported timing belt   
Compact Powerful Vacuum Blower
VFD (Variable Frequency Drive)
Sturdy, light weight honey comb vacuum bed 

Notes: we are always improving and innovating in technology and quality. All machines can be designed according to those given parameters and requests from customers.

Printing Sample

     View  glass               Access control glass        Touch panel glass        Operate panel glass



Packing & Delivery Safety and Fast Transportation

1. Packing: Plywood Case for Each Machine 

2. Payment terms: T/T (40% deposit to start the production, 60% paid before delivery) 

3. Delivery date:25-35business days after received the payment. 

4. Delivery means: By sea from Shanghai or Ningbo

Contact Us

Product Inquiry
Hangzhou Taoxing Glass Tec Co.,Ltd. was established in 2008, located in Linping, which is known as the Hangzhou's backyard. 

Quick Nav

Product Category

Leave a Message
Copyright  Hangzhou Taoxing Glass Tec Co.,Ltd. All rights reserved.
Supported by Leadong